Skip to content

Knukleboom – Part 3

Knukleboom – Part 3

Time limit: 0

Quiz Summary

0 of 8 Questions completed

Questions:

Information

You have already completed the quiz before. Hence you can not start it again.

Quiz is loading…

You must sign in or sign up to start the quiz.

You must first complete the following:

Results

Quiz complete. Results are being recorded.

Results

0 of 8 Questions answered correctly

Your time:

Time has elapsed

You have reached 0 of 0 point(s), (0)

Earned Point(s): 0 of 0, (0)
0 Essay(s) Pending (Possible Point(s): 0)

Categories

Not categorized 0%

Unfortunately, you have failed the quiz. You may look at your answers below and review the materials before taking the quiz again. You will need a minimum of 80% to move on to the next lesson.
Congrats! You’ve passed the quiz. You are ready to proceed to the next step.

Review
Answered
Correct
Incorrect

Question 1 of 8

1. Question

An operator should not attempt to repair complex loader systems which require specially trained mechanics and/or specialized equipment.

True
Correct Incorrect Correct answer

False
Correct Incorrect Correct answer

Correct

Incorrect
Question 2 of 8

2. Question

Which of the following is not a correct statement?

Use a calibrated torque wrench to check the mounting bolts, boom pins, swing bearing bolts
Correct Incorrect Correct answer

Check steps, ladder, and hand rails for proper attachment
Correct Incorrect Correct answer

Clean your loader periodically to enhance safe operation
Correct Incorrect Correct answer

All are correct statements
Correct Incorrect Correct answer

Never weld on any structural member without first contacting the manufacturer
Correct Incorrect Correct answer

Correct

Incorrect
Question 3 of 8

3. Question

It is recommended that you always shut down the loader engine before refueling.

True
Correct Incorrect Correct answer

False
Correct Incorrect Correct answer

Correct

Incorrect
Question 4 of 8

4. Question

Fluid escaping from hydraulic leaks under sever pressure can penetrate gloves and cause severe injury.

True
Correct Incorrect Correct answer

False
Correct Incorrect Correct answer

Correct

Incorrect
Question 5 of 8

5. Question

It is OK to work on the hydraulic system before the components and oil are cool enough to touch.

True
Correct Incorrect Correct answer

False
Correct Incorrect Correct answer

Correct

Incorrect
Question 6 of 8

6. Question

Which of the following procedures should be conducted before beginning any loader maintenance or repairs.

Completely ground or cradle the grapple
Correct Incorrect Correct answer

Lock-out, tag-out the loader controls
Correct Incorrect Correct answer

Remove the ignition key
Correct Incorrect Correct answer

Put the ignition key in your pocket
Correct Incorrect Correct answer

All should be conducted
Correct Incorrect Correct answer

Correct

Incorrect
Question 7 of 8

7. Question

The appropriate personal protective equipment for operating a loader should include…

Hard hat
Correct Incorrect Correct answer

Safety glasses with side shields
Correct Incorrect Correct answer

Heavy duty boots
Correct Incorrect Correct answer

Sturdy gloves for maintenance
Correct Incorrect Correct answer

All are required
Correct Incorrect Correct answer

Correct

Incorrect
Question 8 of 8

8. Question

The recommended maintenance schedules for your knuckle boom loader can be found…

Pinned to the sun shield
Correct Incorrect Correct answer

In the maintenance section of the operator's manual
Correct Incorrect Correct answer

On a decal located in the doorjamb
Correct Incorrect Correct answer

Can not be found anywhere
Correct Incorrect Correct answer

Correct

Incorrect

Login

Accessing this course requires a login. Please enter your credentials below!

Username or Email Address

Password

Remember Me

Lost Your Password?

Register

Don't have an account? Register one!

Register an Account